Features

• Intrinsically safe

• Rugged construction

• Weatherproof

• High reliability 

• Mains failure operation 

       Approvals
        - Complies with EN50 014/020
        - Interior BaseefaATEX0011U
        - Battery BaseefaATEX0302U
        - MSHA Approval No. IA-18453

The BMA (Battery Mini Amplifier) is a battery powered amplifier unit that provides voice communications and signaling facilities.

An internal Nickel Metal Hydride battery is trickle charged from a central power supply unit via an interconnecting cable. It comprises a steel enclosure which houses two side facing loudspeakers, and a polycarbonate amplifier unit (BMA Interior). The BMA Interior includes a microphone behind a grill on the front and three push buttons. The whole unit is sealed to IP65 to withstand the underground environment. Cable entries (20mm) are provided at each side of the unit. Internal connections are by plugs and sockets for easy maintenance. Stand-alone voice communication and signaling can be provided by a PSU and a number of BMAs interconnected by a 3-core cable.

Broadcast Audio
Signals on the Audio wire that exceed a pre-set threshold are broadcast via the loudspeakers.

Speak (PTT)
Pressing the Speak button disables the loudspeakers and enables the microphone. Speech will be broadcast by any other BMA on
the string, and passed connection is available.

Call Local
The Call Local button causes the main system controller to generate a 2kHz tone for the time that the button is pressed. The tone will be broadcast by all the BMA on the string.

Call Exchange
Pressing the Call Exchange button causes the BMA to generate a 194Hz signal for 5 seconds. The tone will be broadcast by all the other BMAs on the string, and passed to the surface if a connection is available, and may be used to establish a surface call.